میکروکنترلر STM32F030F4P6

Features
 Core: Arm® 32-bit Cortex®-M0 CPU, frequency
up to 48 MHz
 Memories
 16 to 256 Kbytes of Flash memory
 4 to 32 Kbytes of SRAM with HW parity
 CRC calculation unit
 Reset and power management
 Digital & I/Os supply: VDD = 2.4 V to 3.6 V
 Analog supply: VDDA = VDD to 3.6 V
 Power-on/Power down reset (POR/PDR)
 Low power modes: Sleep, Stop, Standby
 Clock management
 4 to 32 MHz crystal oscillator
 32 kHz oscillator for RTC with calibration
 Internal 8 MHz RC with x6 PLL option
 Internal 40 kHz RC oscillator
 Up to 55 fast I/Os
 All mappable on external interrupt vectors
 Up to 55 I/Os with 5V tolerant capability
 5-channel DMA controller
 One 12-bit, 1.0 μs ADC (up to 16 channels)
 Conversion range: 0 to 3.6 V
 Separate analog supply: 2.4 V to 3.6 V
 Calendar RTC with alarm and periodic wakeup
from Stop/Standby
 11 timers
 One 16-bit advanced-control timer for
six-channel PWM output
 Up to seven 16-bit timers, with up to four
IC/OC, OCN, usable for IR control
decoding
 Independent and system watchdog timers
 SysTick timer
 Communication interfaces
 Up to two I2C interfaces
 Fast Mode Plus (1 Mbit/s) support on
one or two I/Fs, with 20 mA current sink
 SMBus/PMBus support (on single I/F)
 Up to six USARTs supporting master
synchronous SPI and modem control; one
with auto baud rate detection
 Up to two SPIs (18 Mbit/s) with 4 to 16
programmable bit frames
 Serial wire debug (SWD)
 All packages ECOPACK®2