میکروکنترلر STM32F100R8T6B

Features
 Core: ARM® 32-bit Cortex®-M3 CPU
 24 MHz maximum frequency,
1.25 DMIPS/MHz (Dhrystone 2.1)
performance
 Single-cycle multiplication and hardware
division
 Memories
 16 to 128 Kbytes of Flash memory
 4 to 8 Kbytes of SRAM
 Clock, reset and supply management
 2.0 to 3.6 V application supply and I/Os
 POR, PDR and programmable voltage
detector (PVD)
 4-to-24 MHz crystal oscillator
 Internal 8 MHz factory-trimmed RC
 Internal 40 kHz RC
 PLL for CPU clock
 32 kHz oscillator for RTC with calibration
 Low power
 Sleep, Stop and Standby modes
 VBAT supply for RTC and backup registers
 Debug mode
 Serial wire debug (SWD) and JTAG
interfaces
 DMA
 7-channel DMA controller
 Peripherals supported: timers, ADC, SPIs,
I2Cs, USARTs and DACs
 1 × 12-bit, 1.2 μs A/D converter (up to 16
channels)
 Conversion range: 0 to 3.6 V
 Temperature sensor
 2 × 12-bit D/A converters
 Up to 80 fast I/O ports
 37/51/80 I/Os, all mappable on 16 external
interrupt vectors and almost all 5 V-tolerant
 Up to 12 timers
 Up to three 16-bit timers, each with up to 4
IC/OC/PWM or pulse counter
 16-bit, 6-channel advanced-control timer:
up to 6 channels for PWM output, dead
time generation and emergency stop
 One 16-bit timer, with 2 IC/OC, 1
OCN/PWM, dead-time generation and
emergency stop
 Two 16-bit timers, each with
IC/OC/OCN/PWM, dead-time generation
and emergency stop
 2 watchdog timers (Independent and
Window)
 SysTick timer: 24-bit downcounter
 Two 16-bit basic timers to drive the DAC
Up to 8 communications interfaces
 Up to two I2C interfaces (SMBus/PMBus)
 Up to 3 USARTs (ISO 7816 interface, LIN,
IrDA capability, modem control)
 Up to 2 SPIs (12 Mbit/s)
 Consumer electronics control (CEC)
interface
CRC calculation unit, 96-bit unique ID
ECOPACK® packages