میکروکنترلر ATTINY13A - DIP

Features
 High Performance, Low Power AVR® 8-Bit Microcontroller
 Advanced RISC Architecture
 120 Powerful Instructions – Most Single Clock Cycle Execution
 32 x 8 General Purpose Working Registers
 Fully Static Operation
 Up to 20 MIPS Througput at 20 MHz
 High Endurance Non-volatile Memory segments
 1K Bytes of In-System Self-programmable Flash program memory
 64 Bytes EEPROM
 64 Bytes Internal SRAM
 Write/Erase Cycles: 10,000 Flash/100,000 EEPROM
 Data retention: 20 Years at 85°C/100 Years at 25°C (see page 6)
 Programming Lock for Self-Programming Flash & EEPROM Data Security
 Peripheral Features
 One 8-bit Timer/Counter with Prescaler and Two PWM Channels
 4-channel, 10-bit ADC with Internal Voltage Reference
 Programmable Watchdog Timer with Separate On-chip Oscillator
 On-chip Analog Comparator
 Special Microcontroller Features
 debugWIRE On-chip Debug System
 In-System Programmable via SPI Port
 External and Internal Interrupt Sources
 Low Power Idle, ADC Noise Reduction, and Power-down Modes
 Enhanced Power-on Reset Circuit
 Programmable Brown-out Detection Circuit with Software Disable Function
 Internal Calibrated Oscillator
 I/O and Packages
 8-pin PDIP/SOIC: Six Programmable I/O Lines
 10-pad MLF: Six Programmable I/O Lines
 20-pad MLF: Six Programmable I/O Lines
 Operating Voltage:
 1.8 – 5.5V
 Speed Grade:
 0 – 4 MHz @ 1.8 – 5.5V
 0 – 10 MHz @ 2.7 – 5.5V
 0 – 20 MHz @ 4.5 – 5.5V
 Industrial Temperature Range
 Low Power Consumption
 Active Mode:
 190 μA at 1.8 V and 1 MHz
 Idle Mode:
 24 μA at 1.8 V and 1 MHz